SunStar Tough Guy U Tube Positive Pressure Tube Heater Fuel Type Propane Heat Output 75000 Btu hour Heat Type Infrared

• 20 Foot Emitter Tube Length. Positive pressure- Push Through System pressurizes the products of combustion though the emitter tubes utilizing a blower inside the burner box.
• Ideal for high heat loss areas including Car Washes, Greenhouses, Swimming Pools, Waste Water Treatment plants, Dairy Barns and other high humidity environments or other spot heating applications where uniform energy distribution is desired.
• Tough Guy Constuction utilizes heat treated aluminized steel tube construction for unsurpassed corrosion resistance, higher operating temperatures, higher surface emissivity and longer life expectancy. Standard 4″ flue and 4″ outside combustion air supply.
• The minimum mounting height is 13ft. above finished floor for uniform energy distribution and human comfort
• Requires the following clearances from any combustible material: 6in. above, 60in. below and 22in. from the sides of the heater

SunStar Straight Vacuum Infrared Tube Heater Fuel Type Propane Heat Output 50000 Btu hour Heat Type Infrared

• 20 Foot Emitter Tube Length. Pull Through System-Vacuum system utilizing a draft inducer that pulls the products of combustion through combustion chamber for increased radiant efficiency and greater safety.
• Ideal for complete building heating using multiple heaters. When a single heater is utilized for building space heating (e.g. spot heating) always use a u-tube for more uniform energy distribution.
• Standard Constuction hot rolled emitter tubes. Standard 4″ flue and 4″ outside combustion air supply to the control box in contaminated environments.
• The minimum mounting height is 11ft. above finished floor for uniform energy distribution and human comfort
• Requires the following clearances from any combustible material: 6in. above, 40in. below and 24in. from the sides of the heater

SunStar Straight Vacuum Infrared Tube Heater Fuel Type Propane Heat Output 175000 Btu hour Heat Type Infrared

• 40 Foot Emitter Tube Length. Pull Through System-Vacuum system utilizing a draft inducer that pulls the products of combustion through combustion chamber for increased radiant efficiency and greater safety.
• Ideal for complete building heating using multiple heaters. When a single heater is utilized for building space heating (e.g. spot heating) always use a u-tube for more uniform energy distribution.
• Standard Constuction hot rolled emitter tubes. Standard 4″ flue and 4″ outside combustion air supply to the control box in contaminated environments.
• The minimum mounting height is 16ft. above finished floor for uniform energy distribution and human comfort
• Requires the following clearances from any combustible material: 6in. above, 93in. below and 42in. from the sides of the heater

SunStar Tough Guy U Tube Vacuum Infrared Tube Heater Fuel Type Propane Heat Output 125000 Btu hour Heat Type Infrared

• 50 Foot Emitter Tube Length. Pull Through System-Vacuum system utilizing a draft inducer pulls the products of combustion through combustion chamber for increased radiant efficiency and greater safety.
• Ideal for high heat loss areas including loading docks, warehouses, car repair shops, farm buildings or other spot heating applications where uniform energy distribution is desired.
• Tough Guy Constuction utilizes heat treated aluminized steel tube construction for unsurpassed corrosion resistance, higher operating temperatures, higher surface emissivity and longer life expectancy. Standard 4″ flue and 4″ outside combustion air supply.
• The minimum mounting height is 14ft. above finished floor for uniform energy distribution and human comfort
• Requires the following clearances from any combustible material: 6in. above, 82in. below and 32in. from the sides of the heater

SunStar Straight Vacuum Infrared Tube Heater Fuel Type Propane Heat Output 75000 Btu hour Heat Type Infrared

• 30 Foot Emitter Tube Length. Pull Through System-Vacuum system utilizing a draft inducer that pulls the products of combustion through combustion chamber for increased radiant efficiency and greater safety.
• Ideal for complete building heating using multiple heaters. When a single heater is utilized for building space heating (e.g. spot heating) always use a u-tube for more uniform energy distribution.
• Standard Constuction hot rolled emitter tubes. Standard 4″ flue and 4″ outside combustion air supply to the control box in contaminated environments.
• The minimum mounting height is 13ft. above finished floor for uniform energy distribution and human comfort
• Requires the following clearances from any combustible material: 6in. above, 60in. below and 24in. from the sides of the heater